list of papers and contributions

0_frontmatter/contribution.tex

@@ -3,7 +3,25 @@
 
 \chapter{Author's contribution}
 
-If you want to include a summary of your contributions to the presented work in the frontmatter, put it here.
+\begin{enumerate}[
+  label=\textbf{Paper \Roman*: \indent}, % Bold labels with Roman numerals
+  leftmargin=*,                  % Adjust margin to fit content
+  labelwidth=3cm,                % Fixed width for labels (adjust as needed)
+  itemindent=0pt,                 % No extra indent for items
+  align=left]
+  \item I performed relativistic simulations to obtain raw one- and two-photon ionisation data used in the analysis and participated in discussions.
+
+  \item I produced all the RRPA results used for comparison with RTDCIS and took part in discussions.
+
+  \item I took part in planning meetings and discussions with our experimental collaborators. I wrote some of the simulation code used to produce the RPAE results
+  and was involved in the discussions during the development of the final state correlation.
+
+  \item I performed simulations to obtain one-photon cross sections. I also wrote a framework for the analysis and was involved in discussions.
+
+  \item This is the paper explaining the matrix formulation I was involved in developing and that I implemented in our relativistic code.
+  I was involved in discussions and writing parts of the paper. 
+
+\end{enumerate}
 
 
 % ---------------------------------------------------------------------- 

0_frontmatter/listofpapers.tex

@@ -7,8 +7,11 @@ The following papers, referred to in the text by their Roman numerals, are inclu
 \vspace{0pt} % Increase to have a larger space before the list is started. 
 
 
-\begin{enumerate}[P{A}PER I: ]
+%\begin{enumerate}[P{A}PER I: ]
 %\begin{enumerate}[I]
+\begin{enumerate}[
+  label=\Roman*:, % Bold labels with Roman numerals
+  align=left]
 
 \setlength{\itemsep}{3.3mm} %Set the vertical distance between the items
 
@@ -19,9 +22,34 @@ The following papers, referred to in the text by their Roman numerals, are inclu
         % Example
 
 
-\item\textbf{Titel}\\
+\item\textbf{Angular anisotropy parameters for photoionization delays}\\
-Author1, Author2, \emph{paper}, \textbf{issue}, page (YEAR).\\
+S. Saha, J. Vinbladh, J. Sörngård, A. Ljungdahl, E. Lindroth \\
-DOI: \href{}{} 
+\emph{Physical Review A}, \textbf{104}, 033108 (2021).\\
+%DOI: \href{https://doi.org/10.1103/PhysRevA.104.033108}{10.1103/PhysRevA.104.033108}
+
+\item\textbf{Relativistic time-dependent configuration-interaction singles method}\\
+F. Zapata, J. Vinbladh, A. Ljungdahl, E. Lindroth, J. M. Dahlström \\
+\emph{Physical Review A}, \textbf{105}, 012802 (2022).\\
+%DOI: \href{https://doi.org/10.1103/PhysRevA.105.012802}{10.1103/PhysRevA.105.012802} 
+
+\item\textbf{Influence of final state interactions in attosecond photoelectron interferometry}\\
+S. Luo,  R. Weissenbilder, H. Laurell, R. Y. Bello, C. Marante, M. Ammitzböll, L. Neoričić,
+A. Ljungdahl, R. J. Squibb, R. Feifel, M. Gisselbrecht, C. L. Arnold, F. Martín, E. Lindroth,
+L. Argenti, D. Busto, A. L’Huillier \\
+\emph{Physical Review Research}, \textbf{6}, 043271 (2024).\\
+%DOI: \href{https://doi.org/10.1103/PhysRevResearch.6.043271}{10.1103/PhysRevResearch.6.043271} 
+
+\item\textbf{Radon paper}\\
+S. Saha, A. Ljungdahl, C. L. M. Petersson, J. Sörngård, J. Vinbladh, E. Lindroth \\
+\emph{Manuscript} \\%, \textbf{}, 0 (0).\\
+%DOI: \href{}{}
+
+\item\textbf{Method paper}\\
+C. L. M. Petersson, A. Ljungdahl, E. Lindroth \\
+\emph{Manuscript} \\%, \textbf{}, 0 (0).\\
+%DOI: \href{}{}
+
+
 
 \end{enumerate}
 

1_introduction/introduction.tex

@@ -23,12 +23,17 @@
 
 \chapter{Introduction} % top level followed by section, subsection
 
+\section{Hellope}
 
-\section{What is this?}  
+I am writing some stuff for my thesis hueheuheu.
 
-This is a template for producing PhD-thesis at Stockholm University (SU)\nomenclature{SU}{Stockholm University} using pdf\LaTeX. It could also, with some alterations, be used for Master thesis and Licentiat thesis. Observe that it is designed to be used with pdf\LaTeX and will not work (at least not as in the present state) with \TeX,\LaTeX or pdf\TeX.
 
-The template produces all necessary parts such as half title page, title page, printing info and so on. Simply input the information as called for in the file \emph{thesis.tex}. It also produces a number of parts for the front matter and back matter. Some of these parts are mandatory and some are optional depending on whether the it is a monograph or a summary. Comment or uncomment these to fit your preferences. For more information see Section~\ref{layout}. 
+
+%\section{What is this?}  
+
+%This is a template for producing PhD-thesis at Stockholm University (SU)\nomenclature{SU}{Stockholm University} using pdf\LaTeX. It could also, with some alterations, be used for Master thesis and Licentiat thesis. Observe that it is designed to be used with pdf\LaTeX and will not work (at least not as in the present state) with \TeX,\LaTeX or pdf\TeX.
+
+%The template produces all necessary parts such as half title page, title page, printing info and so on. Simply input the information as called for in the file \emph{thesis.tex}. It also produces a number of parts for the front matter and back matter. Some of these parts are mandatory and some are optional depending on whether the it is a monograph or a summary. Comment or uncomment these to fit your preferences. For more information see Section~\ref{layout}. 
 
 
 

notes.txt

@@ -0,0 +1,36 @@
+THESIS NOTES
+
+++++ Struktur
+
+Vad för kapitel ska jag ha?
+
+
+
+++++ Artiklar
+
+---
+PhysRevResearch
+Influence of final state interactions in attosecond photoelectron interferometry
+https://journals.aps.org/prresearch/abstract/10.1103/PhysRevResearch.6.043271
+https://journals.aps.org/prresearch/pdf/10.1103/PhysRevResearch.6.043271
+
+---
+PRA
+Relativistic time-dependent configuration-interaction singles method
+https://journals.aps.org/pra/abstract/10.1103/PhysRevA.105.012802
+https://journals.aps.org/pra/pdf/10.1103/PhysRevA.105.012802
+
+---
+Preprint för Radon-artikeln? Hur går det?
+https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1848703&dswid=-7783
+
+---
+PRA
+Angular anisotropy parameters for photoionization delays
+https://journals.aps.org/pra/abstract/10.1103/PhysRevA.104.033108
+https://journals.aps.org/pra/pdf/10.1103/PhysRevA.104.033108
+
+---
+Preprint
+Diagonalized RPAE
+på overleaf WIP

thesis.tex

@@ -3,6 +3,8 @@
 %                LATEX TEMPLATE FOR PhD THESIS AT STOCKHOLM UNIVERSITY
 % ----------------------------------------------------------------------
 
+
+
 % based on Harish Bhanderi's PhD/MPhil template, then Uni Cambridge
 % http://www-h.eng.cam.ac.uk/help/tpl/textprocessing/ThesisStyle/
 % corrected and extended in 2007 by Jakob Suckale, then MPI-CBG PhD programme
@@ -22,6 +24,8 @@
 % An macro that you may use frequently is the figuremacro
 \include{Latex/Macros/MacroFile1}
 
+\usepackage{enumitem}
+
 
 \setcitestyle{square,numbers} % change how references are included (see the natbib package).
 
@@ -29,9 +33,9 @@
 %:                  TITLE PAGE
 % --------------------------------------------------------------
 
-\title{Title of your thesis}%Title of the thesis
+\title{Time-independent relativistic photoionisation}%Title of the thesis
-\subtitle{Subtitle}% Subtitle of the thesis
+\subtitle{Simulating attosecond interferometry}% Subtitle of the thesis
-\author{\href{mailto:email@department.su.se}{Your Name}}
+\author{Anton Ljungdahl}
 
 %put the following in PDF header
 
@@ -46,13 +50,13 @@
 %\pdfcatalog { /PageMode (/UseOutlines)
 %                  /OpenAction (fitbh)  }
 
-\pdfinfo{
+%\pdfinfo{
-   /Author (Nicola Talbot)
+%   /Author (Nicola Talbot)
-   /Title  (Creating a PDF document using PDFLaTeX)
+%   /Title  (Creating a PDF document using PDFLaTeX)
-   /CreationDate (D:20040502195600)
+%   /CreationDate (D:20040502195600)
-   /Subject (PDFLaTeX)
+%   /Subject (PDFLaTeX)
-   /Keywords (PDF;LaTeX)
+%   /Keywords (PDF;LaTeX)
-}
+%}
 
 
 
@@ -97,7 +101,7 @@
 {\fontfamily{verdana}\selectfont
 {\scriptsize
 \noindent
-\copyright Your Name, Stockholm 20XX % Name of author, location year
+\copyright Anton Ljungdahl, Stockholm 2025 % Name of author, location year
  
 \vspace{5mm}
 \noindent
@@ -105,10 +109,10 @@ ISBN XXX-XX-XXXX-XXX-X % Provided by the library
 
 \vspace{5mm}
 \noindent
-Printed in Sweden by XXXX, Stockholm 2011 %name of printing company
+Printed in Sweden by XXXX, Stockholm 2025 %name of printing company
 
 \noindent
-Distributor: Department of XX, Stockholm University %name of department
+Distributor: Department of Physics, Stockholm University %name of department
 }
 }
 \cleardoublepage
@@ -116,7 +120,7 @@ Distributor: Department of XX, Stockholm University %name of department
 
 %: ----------------------- Tie in front matter ------------------------
 
-\include{0_frontmatter/dedication} % Include a page with dedication
+%\include{0_frontmatter/dedication} % Include a page with dedication
 
 \include{0_frontmatter/listofpapers} % Include a list of papers
 
@@ -184,7 +188,7 @@ Distributor: Department of XX, Stockholm University %name of department
 % But take care that the paths match. You can also change the order of appearance by moving the include commands.
 
 \include{1_introduction/introduction}
-\include{2/instructions}				
+%\include{2/instructions}				
 \include{3/chapter3}	
             
 % Include as many chapters as you need
@@ -203,7 +207,7 @@ Distributor: Department of XX, Stockholm University %name of department
 
 \include{9_backmatter/summary}
 
-\include{9_backmatter/acknowledgement}  % Use this to include an acknowledgement in the backmatter
+%\include{9_backmatter/acknowledgement}  % Use this to include an acknowledgement in the backmatter
 
 %: ----------------------- bibliography ------------------------